COMPLETEB2B.COM

TRENDnet 5-Port Ethernet Switch

• Device Type – Fast Ethernet Switch
• Ports Qty – 5 Ports
• Data Transfer Rate – 10/100 Mbps
• Provide 1K MAC address entries

Product Description
TE100-S5 is an Auto-MDIX switch designed specifically to boost network performance by eliminating network congestions and unnecessary network traffics. Each port on the Switch provides dedicated bandwidth and can negotiate between 10/100Mbps network speeds and half/full duplex modes. Plug and Play provides cost-effective and high performance solutions.

TRENDnet 5-Port Ethernet Switch

You can leave a response, or trackback from your own site.

5 Responses to “TRENDnet 5-Port Ethernet Switch”

1. Dan M. Beadle Says:
   February 20th, 2010 at 6:58 am

   This is the product I wanted – it was the ideal form factor.

   Unfortunately, it was out of stock with no delivery date. I am hung in limbo – it shows that it was “picked requested” for shipment, but never picked up – nor charged. Yet I can’t cancel it.

   Oh well, I bought a D-Link.
   Rating: 3 / 5

2. Arnold J. Fishman Says:
   February 20th, 2010 at 7:47 am

   Worked great for an hour. Plug and play as others has testified. Unfortunately, then because of an odd set of circumstances of reorganization of various devices in my system, I accidently plugged in my modem’s AC power convertor into this switch’s AC port (they are exactly the same size). Unfortunately it did not like it, and in fact within a minute, smoke was coming out of the unit…by the time i realized my mistake the unit was fried. This was totally my mistake, but was shocked that the same size AC convertor plugs are not designed to carry the same amp load! So be careful–the switch is obviously not resistant to stupid mistakes!
   Rating: 4 / 5

3. Clinton Cook Says:
   February 20th, 2010 at 10:05 am

   Before we switched to AT&T U-verse last year, my family used Charter’s digital cable to access the internet for a good five to ten years. In all those years, I watched my dad go through device after device (routers, wireless receivers, switchers) getting frustrated with why all the brands we were trying never seemed to work consistently. And they were top brands (Linksys was one of them).

   The main problem was that the device would work, then it would stop. We’d reset it, it worked again, then it stopped. Eventually, he would give it to me to see if I could get it to work until it quit working altogether. Now, I don’t know if it was product quality or the fact that they were getting really hot (which, considering information is traveling faster causing the devices to get hotter causing companies to rethink heat dissipation, is a rather redundant excuse). All I knew was that, when I started buying my own equipment, I was going to take serious consideration into what brands I was going to buy.

   I owned a 4-port Linksys switcher I got from my grandfather for a while until, suddenly, it could, only, handle three connections at any one time. Whether it was three computers, two computers and an uplink to another switcher, or a computer, an uplink, and a network device, it just wouldn’t handle a fourth device. Sometime around March (2008), I started looking around. Trendnet was on my dad’s list of top five network device manufacturers. And, with the price being low enough, I figured it was worth the money. Two months later, I have no regrets. This is a quality device for an at-home, small network (small as in less than ten network-able devices).

   The device could use the extra lights that let you know connection status, connection speed, etc. But, if you think of this as a reduced-visuals solution to a high-tech, low-priced device, it’s worth every cent.

   Update (6/12/09): The device still works perfectly fine. But, I discovered a flaw with it’s design. There are some little pieces of plastic that help a network plug stay in place. Those pieces of plastic were small enough that a couple of them broke off (of course, because I was studying networking at the time, I can’t help but wonder if I messed with it too much). Now, I have to hold the plugs in place using some string or a rubber band to insure the plug stayed in the port. I’ve since switched to using a 16-port switch I got from my dad’s job because they had since moved onto bigger stuff (most likely more ports and/or in the giga range). It’s a Linksys switch. But, I figure that it’s a professional grade product. As such, I would, still, recommend this product (the Trendnet) for someone working within a budget.
   Rating: 4 / 5

4. Thomas Starr Says:
   February 20th, 2010 at 10:53 am

   Shipping came atleast 4 days before I was expecting it, came just as was described on Amazon. Good doing business with you!
   Rating: 5 / 5

5. techfan Says:
   February 20th, 2010 at 1:36 pm

   Initially upon receiving the TRENDnet switch, I was excited to see how compact it was. Then I looked for the instructions…and kept looking. Since the ports were undifferentiated (and undocumented), I just plugged a cable leading to my router into the first port. And then plugged my other devices into subsequent ports. Everything worked great at first, again I was happy.

   Less than a month later, this (insert expletive) is already dead. I guess you get what you pay for, but I really expected a lifetime measured in months or years, rather than days. My advice, pay a few extra bucks and get something more reliable. Otherwise, if you care about your connection, have some sort of backup mechanism in mind.

   This junk has left me scrambling for a replacement and paying overnight shipping costs as well. No fun. Normally, I’d try to return it, but honestly for [...] its not worth it.
   
   Rating: 1 / 5

Leave a Reply

You must be logged in to post a comment.

Related Posts

• If i have b2b sales experience but want to switch to a career and HR, what’s the best way to do that?
• 3 Port Smart HDMI Switch
• Brother MFC-7840W Laser Multifunction Center with Wireless and Ethernet Network Interfaces
• RiteAV – Cat5e Network Ethernet Cable – Blue – 50 ft.