Dremel 6300-01 120-Volt Multi-Max Oscillating Kit

« Iomega Prestige 320 GB USB 2.0 Portable External Hard Drive 34342

Braun 5270 Silk-épil X’elle Body System Epilator »

Dremel 6300-01 120-Volt Multi-Max Oscillating Kit

Lightweight and compact, easy to use for long periods of time in tight spaces
“Speed advantage” – operating at very high speeds for quick results and smooth finishes
Perfect for your sanding, scraping and cutting needs
Comes in blow molded case for easy storage and portability
Getting Started Booklet

Amazon.com Product Description
Make multitasking easier and more productive with the Dremel 6300-01 Multi-Max Oscillating Tool Kit. Ideal for do-it-yourselfers and professionals, this efficient tool can tackle a wide variety of repair, remodeling, and restoration projects. The Multi-Max offers optimal control, safe operation, and high precision–all while creating minimal dust–making it ideal for cutting, grinding, sanding, scraping, and much more.

The Dremel 6300-01 Multi-Max Oscillating Tool Kit includes:

Oscillating tool
MM610 3/4-inch flexible scraper blade
MM440 three-inch wood flush cut blade
MM450 wood and drywall saw blade
MM11 hook and loop pad
M70W 60, 120, and 240 grit paper
Storage case
Getting Started booklet

A wide speed range and full three-degree oscillation give you optimum control.
View larger.

The compact Multi-Max makes for comfortable, efficient work.View larger.

Lightweight, Compact Design for Easy Handling in Tight Corners
Lightweight and compact, the Multi-Max is a pleasure to handle and hold, and its comfortable design minimizes wrist and hand fatigue, even during intricate, prolonged work. It also accesses tight corners and narrow spaces that conventional saws and sanders simply can’t reach.

Sanding Options for Smooth Finishes
Dremel offers accessories for sanding both bare and painted wood, which is an ideal practice for restoring worn surfaces. Each sand paper is available in 60, 120, and 240 grits. The Dremel Multi-Max offers a new category for grinding with an oscillating tool. Thirty-grit diamond sanding paper allows users to remove cement residue from raw flooring quickly and efficiently.

Ideal for a Variety of Woodworking Projects
Ideal for woodworking projects, the Multi-Max cuts with minimal dust buildup to help keep both your line of vision and workspace clear. It’s also great for precise edging, shaping, and detail work–whether you’re dealing with vintage wooden frames, dollhouse furniture, or kitchen cabinetry.

Great for DIY Projects
Use the Multi-Max to remove sections of drywall, install hardwood flooring, and trim door jambs. There are two grout-removal accessories available in a 1/8-inch size and a 1/16-inch size for wall and floor grout elimination. The Multi-Max even has two different scraping accessories available–the flexible scraper blade for projects such as removing old caulking around the tub or shower and the rigid scraper blade, which is better suited for removing stuck vinyl flooring, carpeting, and carpet padding.

Operation is also consistent, low-noise, and reliable, whether you’re cutting through a subfloor or repairing an antique armoire. Simply plug it in and you’re ready to go. The Multi-Max comes in a blow-molded case for easy storage and portability, and it also includes a “Getting Started” booklet, as well as a variety of accessories.

About Dremel: A History of Brilliance and Innovation
Founded in 1932 in Racine, Wisconsin, Dremel is the industry leader in rotary tools. The company owes its success to the inventive genius of its founder and namesake, Albert J. Dremel. In his lifetime, Mr. Dremel owned 55 patents on a wide range of products from electric erasers to a gas-powered rotary lawn mower. His most famous and important invention was a high-speed rotary tool dubbed the Dremel Moto-Tool. Compact, lightweight, and perfect for a wide range of jobs, the rotary tool was an immediate hit with hobbyists and eventually became accepted as one of the greatest inventions of the 20th century. Today, the Dremel name remains synonymous with utility, durability, and innovation.

What’s in the Box
Oscillating tool; MM610 3/4-inch flexible scraper blade; MM440 three-inch wood flush cut blade; MM450 wood and drywall saw blade; MM11 hook and loop pad; M70W 60, 120, and 240 grit paper; storage case; and Getting Started booklet


The Multi-Max’s many accessories let you tackle a range of jobs, from grinding away cement residue to removing grout.

Dremel 6300-01 120-Volt Multi-Max Oscillating Kit

You can leave a response, or trackback from your own site.

5 Responses to “Dremel 6300-01 120-Volt Multi-Max Oscillating Kit”

Camera Shy Says:
March 13th, 2010 at 10:15 pm
I received my Dremel Multi-Max about a week ago and was anxious to try it out on a serious project. The Project: Cut out exterior window molding that had begun to rot. The tool did the job as expected; in fact I felt like a surgeon cutting out a tumor. However, after just a few minutes of use, the blade came off – not good. The tool oscillates at a high rate of speed which also means it vibrates. I must admit when I installed the blade I was skeptical that a simple hex nut and beveled washer would hold the blade in place. Obviously, it didn’t (and yes, the beveled washer was installed correctly per Dremel’s clear warning). I reinstalled the blade and re-tightened the hex-nut (forcefully to the point the amount of torque made me wonder how long the hub mount would last).

I contacted Dremel and they admitted the loosening blade was a known issue and a fix had been developed in the form of another washer (I presumed a lock washer, but the customer service rep was not sure). She offered to overnight express the washer to me and of course I declined the generous offer and suggested they simply drop it in the mailbox.

Aside from this mishap, I’m pleased and the prospects of the tool are very good. As the first reviewer points out, the blades that come with the kit are wood only blades. However, metal and grout blades are available. Here’s my rating of the various aspects of the tool:

1. Ergonomics – 5-star. Ergonomically, this tool feels good in your hand. Not too big with enough heft to feel like a quality tool. I have used the Fein Multi-master which is bigger and heavier than the Dremel version. However, I like the feel of the Dremel.

2. Power – 5-star. Although I cut through relatively easy-to-cut pine, the tool never felt under-powered. For most projects where you’d use this tool, I don’t think power will be an issue. The ability to cut through materials is likely to be dictated by the blade used (true of any saw).

3. Durability – ?-star. Time will tell. My guess is that the blade changing hub will be the first to go if you end up changing blades frequently.

4. Blade Change Feature – 2-star. In the era of quick blade change everything, Dremel missed the mark with a conventional hex screw setup. It is a slow process of switching from one blade to another. This is where the Fein tool has a distinct edge.

5. Carrying Case – 5-star. Surprisingly nice, well made, attractive, and can hold a few extra blades.

6. Cord Length – 3-star. It’s 6′ feet long and of avg quality. Would have been nice if longer and more rubbery than plastic (just doesn’t uncoil like you’d expect from a good quality electric tool). However, tools with long cords can introduce some baggage.

7. Dremel Customer Service – 5-star. My experience exceeded my expectations. Other companies should take notice.

8. Value – 4-star. In case you’re unaware, Fein had the patent on the oscillating saw until September 30, 2008. This is why it cost $400+ all these years. On October 1st, Dremel, Bosch, and Chicago all came out with competing versions. The Chicago version is on sale at Harbor Freight for $39 while the Bosch (which is battery operated) is just under $200. At just under $100, the Dremel is likely a little over-priced, but, still a decent value. I suspect once Hitachi, Makita, Milwaukee, Ridgid, and others get in on the act, the price will get closer to $50. Their money is made with the replacement blades.

Washer Update – I received the washer from Dremel. As I said above, their customer service was impressive; at least over the phone. The washer I receiver appears to be more of a passifier instead of a solution. It is a flat washer that is significantly over-sized; not fitting the hub’s shaft. I finally bought a right-sized lock-washer and it appears to have done the trick. I retract my 5-star Dremel Customer Service rating above, however, I still recommend the product.
Rating: 3 / 5
Peter A Says:
March 14th, 2010 at 12:43 am
I’ve always loved my Dremel tools so I jumped on this & bought it as soon as it was available. I didn’t read the “fine print” that it’s for WOOD ONLY. I wish someone would have warned me.

The Dremel Multi-Max does NOT have a “REAL” METAL=IRON=NAILS cutting blade! It is not ready for prime time, i.e. a busy worksite! Even Bosch makes their PS50 use a Fein blade adapter.

One the other hand, it is SUPER on wood by itself (= 5 STARS !!). Plunge cuts into 3/4 sub-floor plywood for air ducts are wonderfully smooth, pencil line thin, cuts with very little dust thrown about. Detail smoothing, edgeing, shaping around hard to get at places is as easy as can be. I’ve even “planed” slivers off of cupboard doors, and other tightly fitted pieces, so they fit snug but don’t rub/touch. The more I use it the more I LOVE it!

But even home DIY projects have nails in them. Careful! Just get a Fein 250Q instead ($$), or get the Bosch PS50 (8 minute battery)(Dremel’s parent company) and use Fein blades for small projects. Save yourself some frustration & dull/broken blades if you are out of a wood working shop.

Bosch/Dremel says that they will actually send “replacement” blade stock to stores sometime in November. Here’s hoping (After CPODremel unceremoniously CANCELLED my order through Amazon!)! I’ve hit a couple of nails so far and the kit included blade still works for now. I’m getting the 422 blades when available because they are the strongest.

Two week owner Update: Lovin’ it more each time I turn it on! I’m now glad I got mine before they raised the price! You betcha!

Three week update: The blades haven’t actually broken on nails yet. And it still seems to cut OK, as in – not too dull. Got a B&D CHS6000 6-Volt Handisaw for those pesky nails when I find them. Seems to be a good combo as the Handisaw will cut a bit faster on heavier wood after the M-Max defines the cut line & corner shapes, which it is super at. The limited amount and lack of dispersion of sawdust still surprises me every time!

I’ve tried several ways to make my overall review 4 stars but Amazon doesn’t change it. Sorry, Dremel…

12-02: Added three images of a sub-floor patch showing the use of a Guide Board to get real square straight & parallel to the supporting joist. Wore out the first Wood Cut MM440 blade to butter knife sharpness. It just smoked when pressed to the wood– after several dozen yards of 3/4 plywood and hitting numerous nails. Not too bad for a one inch cutting surface.

Jan-09 update: Blades seem to last longer now that I know to work around nails (when I can). Another things that makes cutting easier, especially in thicker wood, is to wiggle the blade from side to side as cutting to give it a little more air around the blade. This reduces friction (=heat) and allows the dust to escape. When cutting I use almost no pressure (hard habit to break after using other power tools) so “the blade does the work”. Seems to go even faster!

I’ve gotten so used to this tool I need to remind myself to use a sawsall or bigger power tool for bigger jobs (just to save the blade). It doesn’t get hot (small efficient motor?) or uncomfortable in the hand after long use. And I did get the extra washer to hold the blade on (thanks!) but never had one come loose myself. I’ve finished most of my big projects with the MMs help so I thought I’d give a shoutout “Thanks!” to Dremel while I remembered.
Rating: 3 / 5
P. Watase Says:
March 14th, 2010 at 2:52 am
Bought the Dremel at Home Depot. Under a $100, cheap compared to the Fein. But it is only good for crafts and soft woods or non-ferrous metals.

This is not for the contractor or professional as NAILS and SCREWS are often encountered and need cutting.

I was trying to remove exterior trims (Miratec) using the MM442 Wood & Metal cutting blades. However, I hit a nail and the blades teeth were immediately blown out.

Tried using the MM450 Wood and Drywall blade to plunge cut through 1/2″ OSB. Took for ever to cut. Blade was dull after one plunge cut.

Tried the MM440 Wood blade to cut some douglas fir studs and it too was a struggle.

I gave up on the Dremel Multi-Max and used my circular saw.

I would only recommend this for soft woods, plastics and gypbd.
Rating: 1 / 5
Colin D. Michael Says:
March 14th, 2010 at 4:37 am
I’ve been using this tool for two weeks. My use is mostly for making dollhouses and miniatures. I do a lot of sanding, some cutting, some scraping. So far I have found the sanding to be very quick, very efficient, and super easy to switch from working with bare plywood to painted finishes with the Velcro-like attaching system.

The scraper is a good size and the design seems to work well. I have used it to separate glued parts, remove beads of glue, etc. and it has worked well and been easy to control. The lower speed settings seem to help with the control so that I don’t get gouges when I misdirect the tool.

The cutting is still a bit of a mystery. I’m not sure why the included blade just has teeth on the end of it. I was expecting to be able to cut a line, but can only do that with the half-round blades, which are sometimes too big for the tight spaces I work in. I may need to learn better technique with the larger blade or maybe cut one in half. For that matter, mounting it sideways might work, so I’ll have to try that.

The size and feel of the tool is very good. I was surprised by its size, expecting it to be like the rotary tool, but it is larger. Very comfortable for longer sanding jobs, though. All-in-all just the right power and flexibility to make it very handy on the miniatures workbench.
Rating: 4 / 5
D. Patelzick Says:
March 14th, 2010 at 6:47 am
I have watched the advertisement on television for the Fein Multimaster but not having deep pockets I decided to purchase the Multi-Max and try it out. I have used it for a number of different jobs and for the most part it did a good job. Here are some of the tasks that it took on.

Cutting holes in drywall: It works great for cutting holes for electrical boxes – the straight blades leave a nice clean hole without a lot of dust. For those times when you need to get access to plumbing to make changes or to repair a pipe it works nicely. In one case I removed the drywall, made the necessary changes then I was able to reuse the drywall to close up the hole.

Making a flush cut in wood siding: I installed new sliding glass doors that opened on a deck. It worked perfectly to cut the siding at the deck plate so I could get the old door out while leaving a clean cut for the new trim.

Removing underlayment (flooring) next to cabinets: The old underlayment was not reusable and I did not want to remove the cabinets so I made a cut in the the underlayment at the cabinets then removed the majority of the underlayment.

Cutting plumbing tubes and pipes: It did a good job on copper pipe buried in the wall and it did ok on plastic drain pipe. It would cut the plastic but it would melt if you didn’t move fast enough.

I probably used this tool for 16 hours total over two months and it worked fine. I didn’t have problems with the blades coming loose and it never got hot enough to stop because of overheating. The only blade I didn’t use very much was the half circle – with drywall it seems to throw a lot of dust.

Could I have done this work with other tools? Almost certainly but it would have taken longer or there would have been a lot more extra work to repair the damage from other tools. The last job I did with it was to add an electrical box inside a cabinet above a stove. I had to cut through 1/4″ of plywood and 1/2″ of drywall. It was really tight and this little tool allowed me to get inside a make a clean cut that was a perfect fit for the box.

I plan on getting a grout blade next for replacing the grout lines in a tile surface. If I did a lot of remodeling I would purchase the Fein but even so this tooled payed for itself on this one remodeling project.

Rating: 5 / 5

You must be logged in to post a comment.

COMPLETEB2B.COM